It's particularly useful if you want to set up a diversion in a matter of seconds, add a delay, cancel a run or move, add or delete stops.

You can also add a delay. Enter the number of minutes of delay on the counter at the top of your screen.

Don't forget to confirm your changes by clicking on the ‘Apply’ button at the bottom of the screen.

To move a stop, move your mouse over the line of the stop concerned. Then click on ‘Move’.

Then move the position of the stop directly on the map or enter the GPS coordinates of your choice.

Don't forget to click on the ‘Save’ button to confirm your changes.

To add a stop, place your cursor between two stops in the stops view. A ‘+’ symbol will appear. Click on it to add a stop.

You have two options:

When you click on ‘Add a stop manually’, a screen opens. You need to enter the name of the stop and its position, either by entering its coordinates or by placing it on the map.

Don't forget to confirm by clicking on the ‘Save’ button.

You have two options for deleting a stop:

Once deleted, the stop appears in orange with a cross through it.

Don't forget to click the ‘Apply’ button to save the changes.

To change the route of a race, go to the side menu and select ‘Trips’. Then choose the race of your choice.

Once you are there, click on ‘Modify the trip’.

This takes you to the ‘Modify a route’ page, where you will find all the information about the route.

To modify the route, click on the corresponding button at the top left of the map.

The plot editor opens. Click on 1 or 2 points on the route to select a portion to modify.

Once the point or points have been selected, you can click several times on the map to define alternative coordinates.

So you can easily create a deviation by selecting one or more points as shown below. You can move them at any time by dragging the points.

If you want to delete a point, right-click on it.

Don't forget to click on the ‘Confirm’ button to confirm your changes.

You can undo all your changes at any time by clicking on the ‘Reset route’ button.

Don't forget to save your changes by clicking on the save button at the bottom left.

You can find these diversions in the Deviations view, accessible via the side menu. To access it, click on ‘Deviations’.

You can programme your passenger information directly from this screen. Click on the corresponding button and a pop-up window appears. In this window, you can change the header, description, dates, cause, effect or elements affected.

Don't forget to save your changes by clicking on ‘Submit’.

Cancelling a trip couldn't be easier. Simply tick the ‘Cancel trip’ box.

You can restore it by clicking on the button in the centre of the map.

Don't forget to click on the ‘Apply’ button to validate the changes.