Skip to main content
Activate the travel application
A
Written by Antoine Marin
Updated over 5 months ago

Introduction

As a AVM solution, Pysae encourages you to stay in touch with your passengers, so that you can keep them informed of your vehicle traffic via the application.

In this article, you will find information on how to get your passenger application up and running:

  • activating the application

  • application configuration

Activating the application

To get your application up and running and accessible to your passengers, you need to activate it. To do this, go to your Pysae operating platform, hover over "Passenger info" in the left-hand side menu, then click on "Passenger application".

Once on the page, click on the application activation button and don't forget to save.

That's it! Your travelers now have access to their application for real-time information.

Application settings

When you activate the application, you have the option of displaying (or not) all the lines in your network. To do this, click on the "Display lines" button. The information is then updated on the application.

You can also add a logo for your network, to make it more easily identifiable. It must be in 64 x 64 pixel format.

Good to know: Pysae supports logos in .jpg, .jpeg and .png formats.

You can then choose the color of your network by clicking on the green rectangle (default color). Choose the format in which you wish to indicate your color (RGB or HEXA or HSL), then enter the color code.

Finally, enter the e-mail address and telephone number you'd like to be associated with your traveler application.

Your application is set up!

Did this answer your question?